Same goes for tx-burst-rate and tx-burst-threshold and tx-burst-time. If tx-rate is not specified, rx-rate is as tx-rate too. All rates should be numbers with optional 'k' (1,000s) or 'M' (1,000,000s). Rate-limit ( integer ]]] Default: )Īdds a dynamic simple queue to limit IP's bandwidth to a specified rate.
Prefix pool that is being advertised to the DHCPv6 Client. Identity Association Identifier, part of the Client ID. Should be specified only in hexadecimal format. Requires IPv4 DHCP Server to have this option enabled as well to work properly.Īdd additional DHCP options from option list.ĭUID value. IPv6 prefix that will be assigned to the clientĪllow-dual-stack-queue ( yes | no Default: yes)Ĭreates a single simple queue entry for both IPv4 and IPv6 addresses, uses the MAC address and DUID for identification. The client will try to renew this address after a half of this time and will request a new address after time limit expires.ĭUID is used only for dynamic bindings, so if it changes then client will receive different prefix than previously. The time that a client may use the assigned address. Interface on which server will be running. Whether DHCP-PD server participate in prefix assignment process. If set to none - there is no threshold (all DHCP packets are processed) If secs field in DHCP packet is smaller than delay-threshold, then this packet is ignored.
bindingBound - set to "1" if bound, otherwise set to "0"ĭelay-threshold ( time | none Default: none). Internal "global" variables that can be used in the script: Script that will be executed after binding is assigned or de-assigned. 
no - dhcp server ignores clients requests for addresses that are not available from this server. yes - to clients request for an address that is not available from this server, dhcp server will send negative acknowledgment (DHCPNAK). after-2sec-delay - to clients request for an address, dhcp server will wait 2 seconds and if there is another request from the client after this period of time, then dhcp server will offer the address to the client or will send DHCPNAK, if the requested address is not available from this server. after-10sec-delay - to clients request for an address, dhcp server will wait 10 seconds and if there is another request from the client after this period of time, then dhcp server will offer the address to the client or will send DHCPNAK, if the requested address is not available from this server. Whether the DHCP server is the only one DHCP server for the network: IPv6 pool, from which to take IPv6 prefix for the clients.Īuthoritative ( after-10sec-delay | after-2sec-delay | yes | no Default: after-2sec-delay) This sub menu lists and allows to configure DHCP-PD servers.Īddress-pool ( enum | static-only Default: static-only) Note: RouterOS DHCPv6 server can only delegate IPv6 prefixes, not addresses.
0 kommentar(er)
